==== LCD-projector ====
Read the instructions carefully before use. Abuse may lead to bulb damage. Pay special attention to cooling time and minimum time in use. Power cable is stored in a locked cabinet.

 Inputs:
   *VGA
   *HDMI
   *S-Video
   *Coaxial
   *YPbPr

**Quick Guide to the Projector:**
  -Hook up the power cable.
  -Turn on the switch on the back of the projector for standby.
  -During standby, the projector can be turned on with the button on the bottom of the projector or the remote. Please note that heating up takes up to a minute!
  -Do **NOT** switch off or unplug the projector while heating up! This may **DAMAGE** the bulb!
  -**Minimum** time of use each time is **10 minutes**.
  -You can select the input with the remote. VGA is labeled "Computer".
  -After use, set the projector back to standby by tapping the power button twice. Bulb turns off and the device starts cooling. While cooling, a red light will blink on the bottom. This may take few minutes. Do **NOT** unplug the device while cooling.
  -Red light will stop blinking (stays on) when the cooling is done. Now you can switch the standby off.
  -Return the power cable neatly to the AV-cabinet.